主页 | KIONIX 产品 | 加速度计 | KX222-1054
 
 
product-image
 

KX222-1054
Tri-Axis, User Selectable ± 8g, 16g, 32g, Digital (I2C/SPI) Output, Integrated FIFO/FILO buffer, 2x2x0.9mm LGA - KX222-1054

The KX222-1054 is a tri-axis +/-8g, +/-16g or +/-32g silicon micromachined accelerometer with integrated 2048 byte buffer, orientation, tap/double tap, activity detecting, and Free fall algorithms. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device using a glass frit. A separate ASIC device packaged with the sense element provides signal conditioning, and intelligent user-programmable application algorithms. The accelerometer is delivered in a 2 x 2 x 0.9 mm LGA plastic package operating from a 1.71 – 3.6V DC supply. Voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics over the range of input supply voltages. I2C or SPI digital protocol is used to communicate with the chip to configure and check for updates to the orientation, Directional TapTM detection, Free fall detection and activity monitoring algorithms.

特点:

  • Compact form factors 2x2x0.9mm LGA package
  • User selectable higher-g ranges: ±8g, 16g, 32g full scale range
  • Frequency response up to 6kHz
  • 0.781Hz to 25.6kHz user configurable Output Data Rates (ODR)
  • 16-bit resolution
  • User-selectable Low Power or High Resolution modes
  • Embedded 2048-byte extra-large FIFO/FILO buffer
  • Digital High-Pass Filter Outputs
  • Internal voltage regulator to maintain constant internal operating voltages throughout the 1.71 - 3.6V input supply range
  • Low Power Consumption with FlexSet™ Performance Optimization
  • Enhanced integrated freefall, directional Tap/Double-TapTM and device-orientation algorithms
  • Digital I2C up to 3.4MHz
  • Digital SPI up to 10MHz
  • Excellent temperature performance
  • High shock survivability (10,000g)
  • Factory Programmed Offset and Sensitivity
  • Self-test Function

亮点

  • Up to ±32g full scale range
  • Frequency response up to 6kHz
  • User-selectable Output Data Rate up to 25600Hz
  • Extra-large embedded 2048 byte FIFO/FILO buffer
  • Small Footprint
  • Digital High-Pass Filter Outputs
  • Enhanced integrated Free fall, Directional Tap/Double-Tap™, and Device-orientation Algorithms
  • User-configurable wake-up function
  • Excellent Temperature Performance
  • High Shock Survivability

产品规格

G 值范围 加速度灵敏度 噪音 (µg/√Hz) 分辨率 封装大小 引脚 封装类型 接口(输出) 唤醒功能 工作温度 (Min.)[°C] 工作温度 (Max.)[°C] 电源电压 [V] 电流消耗
3 8g, 16g, 32g, User-selectable 4096, 2018, 1024 (16-bit), (counts/g) 450 8-bit, 16-bit 2x2x0.9mm 12-pin LGA Digital SPI/I²C Yes -40 85 1.71-3.6 10-145 μA

评估板

零件号 立即购买 说明 文档
EVAL-KX222-1054 Cart KX222-1054 Evaluation Board Board Layout
Board Schematic

开发工具

立即购买 说明
USBDEVKIT Cart This Kit is composed of a Kionix Evaluation Board on which is soldered a customer-specified 3.3V Kionix accelerometer product, a Silicon Labs C8051F340DK that provides the microprocessor control and USB interface, and a Kionix F340 Adapter Board that provides the link between the Kionix Evaluation Board and the microprocessor.